For all your accessory need↑↑$¥s. Renold has a wide range oσα♣f attachment chains to s↓★₹•uit every need.

– Standard applications

– Hygienically sensitive a&ε"•reas

– Water-related environment

– High corrosiveness

– Extreme temperature conditi₹≠ons

For standard applicati¥•≈Ωons:

Renold Brand Standard Adapter Chain ©β≥₽ 24-Hour DESPTACH – Guarante✔<©ed.

Renold's team of expert e¥&∑×ngineers provide guar≈♣σ€anteed 24-hour attachment cha∑ε∞in service for BS steel ↕‍≠'drive chains with pitches ranging from≥δ half an inch (08B) to one inch (16B)₽∏, complete with standard M and K attachε≤ments, extended pins, and t¥←>o customer specifications. (Exclude€σ‍₩s crank linkages and λ→☆↔special components). Avail±λ↓able from every spacing up t>↕•≤o every 10 slots. 1 aφ>αnd 2 sides. Up to 20m. 

With a high degree of f ←atigue resistance and a breaking∞¶​↓ load that exceeds all internatiλ®∏onal standards, the Renold br↑✘¥γand is the benchmark for standard ₹∞chain applications.

Get an instant quote over the ph ÷one, and once your order is £>←confirmed, your chain will 'α≈✘be built with Renold's high-perfε$∏ormance base chains and attachments, ♠∏ready to ship within 24 hour¶¥s.

Suitable for use in hygienicσ>ally sensitive areas

Renold's low maintenance ★λis the perfect solution ©δfor applications where lubricεφation is not possible, unnecessary, or÷®€ practical.

Renold's low-maintena×∞‍↔nce brand chains fea <ture ingenious sintered bushing techn ★ology. The bushing w ∞βorks like a metal sponge – fille<≈§d with small holes filled with π←​λlubricant. During operation, the lubr®σicant is released onto the bearingΩβ surface. When the chλ♦ain is not running, t✘€he lubricant is returned to the sintereπ≥§★d bushing. This technology δ>÷‌makes the chain ideal for hygienically Ω₽♥sensitive environments, suchλ" as the paper or packaging ♣∞industries.

Renold low maintenance with tσ∏♠he Renold brand

The graph above shows thaγ♠t Renold's low-maintenance performa↑♥↕₹nce is approximately ←∞δ≤70% higher than that of the&↕♠ Renold brand in a lo∏αw-lubrication environment.

Available in 08B to 16B simplex with st₽★✘andard pin diameters, f><or more information on sizes, plea★→ λse contact customer ser↔€vice to inquire

 

Suitable for use in corrosive environme♦®×∑nts

Renold stainless steel perfor♣¶ms very well in acidic, γ♥∑εalkaline environments (where →∑≥&chains are exposed to water) and vδε★ery extreme temperature conditions ←​​≤(-40° to +400°C), where corrosion resis±λ×→tance is critical.

 

When chemical resistance is a must, R↓↔↔≈enold stainless steel chains should €•±be chosen. It is manufactured with F÷γ‍↑DA-approved materials and pre-lub¥α ¥ricated with USDA H1 approved lubrica±δ'™nts. All components are made of austeni‍εtic rust-resistant s "πteel.

Renold stainless steel vs ↓. competitors

The graph above shows that Renold stβ≥¶ainless steel performs δσsignificantly better than sev↔₽δ↕eral low-cost alternativβ÷¥§e stainless steel produεπcts. This is because:

• Excellent corrosion re←≤ ≤sistance of austenitic stainle'∞α ss steels

• Pin cold drawing strength up to 1600 ‌×‍¶N/mm² – providing excellent wear resist‌™φ≥ance.

• The rollers are extruded and stu‌↓rdy – more efficient perforβ↔☆$mance compared to crim ¥ped rollers.

• Manufactured plates with ex™∞≤πtremely high hardness; Up to φβε1100 N/mm² – contributes to impr↔♠βδoved fatigue performance

Accessory chains require excellent se ↑₽•rvice, fast quotes, immediate deli "≥very and fast delivery<σ.